DALI DT8 RGBW PWM dimmer IP67, 4 channel, 12-36V 4x5A

Product description DALI DT81 address universal push-dim PWM dimmer IP67, 4 channel, 12-36V 4x5A, 48V 4x3A GTIN – EAN 9009377095313 Features Special features Dimmer for RGB, RGBW as well as SC & CCT. Only install and connect when voltage-free! Nominal voltage 12 – 36 V DC Rated power 720 W Protection class IP67 Housing material Plastic Length in mm 180,0 Width in mm 75,0 Height in mm 38,0 Guarantee in years 2 • In compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2. • Built-in DALI-2 interface, DALI DT6 device • Match all DALI systems in the market • Manual /automatically DALI address setting • DALI address digital indicate • Four channels with same address • To work with power repeater to expand output power unlimitedly. • Waterproof grade:IP67 Setting DALI address 1.1. Press and hold down any of the two buttons until numeric digital display flashes, then release the button. 1.2. Click any of the two buttons once to select a digit, click again to change the digit until the desired DALI address appears. Click first button to set “tens” position and second button to set “units” position. The address can be set from 00~63. 1.3. Then press and hold down any of the 2 buttons until the numeric digital display stops flashing to confirm the setting. Note: DALI address can be manually assigned from 00-63-FF, by factory defaults, no DALI address is assigned for the dimmer, and the display shows . Setting DALI address as will reset the dimmer to factory defaults. Operation DALI Controller DALI Master Function introduction Product Data • DO NOT install with power applied to device. • This device is IP67 rating and protected against damp environment. Safety & Warnings Important: Read All Instructions Prior to Installation DALI Address Assigned by DALI Masters DALI address can also be assigned by DALI Master controller automatically, please refer to user manuals of compatible DALI Masters for specific operations. Note: The digital display will show When the DALI master is assigning addresses. Once an address is selected, all four channels’ address will be the same. For example, if the dimmer is addressed to 22 on the display then CH1, CH2, CH3, CH4 will be the same address 22. SKU: ISO-115066 Categories: DALI LED lighting, Low voltage 12V, 24V LED switches/controllers